Customization: | Available |
---|---|
Usage: | Data Center, Ethernet Switches, Routers, etc |
Type: | Optical Module |
Still deciding? Get samples of US$ 200.00/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Brocade Compatible 16G DWDM CH17~CH61 SMF 40km 16gbps SFP+ Mux Demux Transceiver Module
MVSLINK OFSF16G40x-Dxx Transceiver is intended for 40km reach service 14.025Gb/s DWDM D18~D61 single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It consumes low power, operates base on 3.3V DC power supply and is offered in the industrial temperature range. They are compliant with SFP+ MSA, SFF-8431 and SFF-8432.
The low jitter and low bit error rate optical assembly features a D18~D61 EML laser transmitter and PIN receiver. The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.
MVSLINK 25G SFP28 DWDM transceiver comes with an Industry Leading Lifetime Warranty, surpassing the OEM warranty for the same product. Every SFP28 DWDM transceiver is environmentally tested in its specific port/platform, which includes compliance verification for distance, wavelength, traffic density and light.
Absolute Maximum Ratings
Parameter | Symbol | Unit | Min | Max |
Storage Temperature Range | Ts | oC | -40 | 85 |
Relative Humidity | RH | % | 0 | 95 |
Maximum Supply Voltage | Vcc | V | -0.5 | 4.0 |
Parameter | Symbol | Unit | Min | Typ | Max |
Power Supply Voltage | Vcc | V | 3.14 | 3.3 | 3.46 |
Bit Rate | BR | Gb/s | 14.025 | ||
Bit Error Ratio | BER | 1*10-12 | |||
Max Supported Link Length | L | Km | 40 |
Parameter | Symbol | Unit | Min | Typ | Max | Note |
Supply Voltage | VCC | V | 3.14 | 3.3 | 3.46 | |
Power consumption | P | mW | 1800 | C-temp | ||
Transmitter | ||||||
Input Differential Impedance | RIN | Ω | 100 | |||
Single-ended Data Input Swing | VIN | mVp-p | 90 | 450 | ||
Transmit Disable Voltage | VDIS | V | 2 | VCCHOST | ||
Transmit Enable Voltage | VEN | V | VEE | VEE+0.8 | ||
Transmit Fault Assert Voltage | VFA | V | 2 | VCCHOST | ||
Transmit Fault De-Assert Voltage | VFDA | V | VEE | VEE+0.4 | ||
Receiver | ||||||
Single-ended Data Output Swing | VOD | mVp-p | 200 | 450 | ||
LOS Fault | VLOSFT | V | 2 | VCCHOST | ||
LOS Normal | VLOSNR | V | VEE | VEE+0.4 |
Parameter | Symbol | Unit | Min | Typ | Max | Note |
Transmitter | ||||||
Nominal Wavelength | λC | nm | 1528.77~1563.05 | |||
Center Wavelength Spacing | GHz | 100 | ||||
Average Output Power | Pav | dBm | -2 | 5 | ||
Spectral Width (-20dB) | s | nm | 1 | |||
Extinction Ratio | ER | dB | 6 | |||
Side Mode Suppression Ratio | SMSR | dB | 30 | |||
Transmitter and Dispersion Penalty | TDP | dB | 4 | |||
Average Launch Power of OFF Transmitter | POFF | dBm | -30 | |||
Relative Intensity Noise | RIN | dB/Hz | -128 | |||
Receiver (PIN/TIA) | ||||||
Center Wavelength | λC | nm | 1260 | 1620 | ||
Receiver Sensitivity(OMA) | RSENSE | dBm | -14.5 | 1 | ||
Receiver Overload (OMA) | Pmax | dBm | 2 | |||
Optical Return Loss | dB | -26 | ||||
LOS Assert | LOSA | dBm | -30 | |||
LOS De-Assert LOS | LOSD | dBm | -17 | |||
LOS Hysteresis | dB | 0.5 |
Note1: Measured at 14.025Gb/s, ER>=6dBm, PRBS 231-1 and BER better than or equal to 1E-12
Product Features
Applications
Q: Do you support customization?
A: Definitely yes, customization is available according to your product requirements.
Q: Can l get a sample first?
A: We do offer samples before making any production so that the production is up to the buyer's expectation. Samples can be delivered within 5-8 days.
Q: What is your MOQ?
A: 1 piece is available. We can also provide free samples for our valued customers.
Q: How much will the shipping charges be?
A: It depends on the size of your shipment and the method of shipping. We will offer the charge to you as you requested. If you have another question, please contact us.
Q: Are you a real manufacturer?
A: Yes, our factory is located in Suzhou, China, with 12 years of experience.
Q: How to place an order?
A: Please contact our sales representative or send us an inquiry, and we will contact you within 12 hours.
****Contact Sales for a fast conversation