Usage: | Telephone, Computer, Workstation, Server, Mobile phone, Laptop |
---|---|
Type: | Optical Module |
Support Network: | Ethernet |
Samples: |
400G OSFP SR4 Modules
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Brand New 400g Osfp Sr4 400gbps Transceiver 850nm 100m Multimode MPO-12 APC Osfp Fiber Optical Module
The Approved Networks 400GBASE-SR4 OSFP SMF PAM4 850nm 100m DOM Transceiver is guaranteed 100% Compatible and Functional in its intended router or switch.
MVSLINK 400G OSFP SR4 transceiver comes with an Industry Leading Lifetime Warranty, surpassing the OEM warranty for the same product. Every OSFP SR4 transceiver is environmentally tested in its specific port/platform, which includes compliance verification for distance, wavelength, traffic density and light.
ABSOLUTE MAXIMUM RATINGS (TC=25°C, UNLESS OTHERWISE NOTED)
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings will cause permanent damage and/or adversely affect device reliability.
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Storage Temperature | TS | -40 | - | +85 | ºC | |
Maximum Supply Voltage | Vcc | -0.5 | - | 3.6 | V | |
Operating Relative Humidity | RH | 5 | - | 95 | % | No condensation |
Control Input Voltage | VI | -0.3 | - | VCC+0.5 | V |
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Operating Case Temperature | TOPR | 0 | - | 70 | ºC | |
Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | |
Instantaneous peak current at hot plug | ICC_IP | - | - | 3600 | mA | |
Sustained peak current at hot plug | ICC_SP | - | - | 3000 | mA | |
Maximum Power Dissipation(400G) | PD | - | - | 8.5 | W | |
Maximum Power Dissipation(200G) | PD | - | - | 6.5 | W | |
Maximum Power Dissipation, Low Power Mode | PDLP | - | - | 1.5 | W | |
Signaling Rate per Lane | SRL | - | 53.125 | - | GBd | PAM4 |
Two Wire Serial Interface Clock Rate | - | -100 | - | 400 | kHz | |
Power Supply Noise Tolerance (10Hz - 10MHz) | - | - | - | 66 | mV | |
Rx Differential Data Output Load | - | - | 100 | - | Ohm | |
Operating Distance (OM3) | - | 2 | - | 30 | m | |
Operating Distance (OM4) | - | 2 | - | 50 | m |
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Wavelength | λC | 844 | 850 | 863 | nm | |
RMS spectral width | λrms | 0.6 | nm | |||
Average Launch Power, each lane | AOPL | -4.6 | - | 4.0 | dBm | 1 |
Outer Optical Modulation Amplitude (OMAouter), each lane | TOMA | -2.6 | 3.5 | dBm | 2 | |
Transmitter and Dispersion Eye Closure for PAM4 (TDECQ), each lane | TDECQ | - | - | 4.4 | dB | |
Average Launch Power of OFF Transmitter, each lane | TOFF | - | - | -30 | dBm | |
Extinction Ratio, each lane | ER | 2.5 | 3.5 | - | dB | |
RIN14OMA | RIN | - | - | -132 | dB/Hz | |
Optical Return Loss Tolerance | ORL | - | 12 | dB | ||
Transmitter Reflectance | TR | - | - | -26 | dB | 3 |
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Wavelength | λC | 842 | 850 | 863 | nm | |
Damage Threshold, average optical power, each lane | AOPD | 5 | - | - | dBm | |
Average Receive Power, each lane | AOPR | -6.3 | - | 4.0 | dBm | |
Receive Power (OMAouter), each lane | OMAR | - | - | 3.5 | dBm | |
Receiver Reflectance | RR | - | - | -26 | dB | |
Receiver Sensitivity (OMAouter), each lane | SOMA | - | - | -4.4 | dBm | 1 |
Stressed Receiver Sensitivity (OMAouter), each lane | SRS | - | - | -1.8 | dBm | 2 |
Conditions of stressed receiver sensitivity test | ||||||
Stressed eye closure for PAM4 | SECQ | 4.4 | dB | |||
OMAouter of each aggressor lane | OMAouter | 3.5 | dBm |
Notes
1. Receiver sensitivity (OMAouter), each lane (max) is informative and is defined for a transmitter with TDECQ<=1.8 dB
2. Measured with conformance test signal at TP3 for the BER = 2.4x10-4
Product Features
Applications
Data Centers:
Enterprise Networks:
High-Performance Computing (HPC):
Cloud Computing:
Q: Do you support customization?
A: Definitely yes, customization is available according to your product requirements.
Q: Can l get a sample first?
A: We do offer samples before making any production so that the production is up to the buyer's expectation. Samples can be delivered within 5-8 days.
Q: What is your MOQ?
A: 1 piece is available. We can also provide free samples for our valued customers.
Q: How much will the shipping charges be?
A: It depends on the size of your shipment and the method of shipping. We will offer the charge to you as you requested. If you have another question, please contact us.
Q: Are you a real manufacturer?
A: Yes, our factory is located in Suzhou, China, with 12 years of experience.
Q: How to place an order?
A: Please contact our sales representative or send us an inquiry, and we will contact you within 12 hours.
****Contact Sales for a fast conversation
Suppliers with verified business licenses