Product Description
NVIDIA InfiniBand MMA4Z00-NS400 Compatible OSFP 400G SR4 PAM4 Optical Transceiver (MMF, 850nm, 50m, MPO-12/APC, DOM, Flat Top)
The NVIDIA InfiniBand MMA4Z00-NS400 Compatible OSFP Optical Transceiver is an InfiniBand 400Gb/s Single-port OSFP, SR4 multimode parallel transceiver using a single, 4-channel MPO-12/APC optical connector.
The Short Reach 4-channel (SR4) design uses 100G-PAM4 modulation and has a maximum fiber reach of 50-meters using OM4 multimode fibers.
It is qualified for use in InfiniBand NDR end-to-end systems.
It is the ideal solution for supercomputing, seamlessly integrating into computing and storage infrastructure to ensure efficient high-performance interconnectivity. Used in ConnectX-7/OSFP adapters linked to Twin-port transceivers in 2x400G IB switches.
GENERAL SPECIFICATION
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
Operating Case Temperature |
TOPR |
0 |
- |
70 |
ºC |
|
Power Supply Voltage |
VCC |
3.135 |
3.3 |
3.465 |
V |
|
Instantaneous peak current at hot plug |
ICC_IP |
- |
- |
3600 |
mA |
|
Sustained peak current at hot plug |
ICC_SP |
- |
- |
3000 |
mA |
|
Maximum Power Dissipation(400G) |
PD |
- |
- |
8.5 |
W |
|
Maximum Power Dissipation(200G) |
PD |
- |
- |
6.5 |
W |
|
Maximum Power Dissipation, Low Power Mode |
PDLP |
- |
- |
1.5 |
W |
|
Signaling Rate per Lane |
SRL |
- |
53.125 |
- |
GBd |
PAM4 |
Two Wire Serial Interface Clock Rate |
- |
-100 |
- |
400 |
kHz |
|
Power Supply Noise Tolerance (10Hz - 10MHz) |
- |
- |
- |
66 |
mV |
|
Rx Differential Data Output Load |
- |
- |
100 |
- |
Ohm |
|
Operating Distance (OM3) |
- |
2 |
- |
30 |
m |
|
Operating Distance (OM4) |
- |
2 |
- |
50 |
m |
|
TRANSMITTER CHARACTERISTICS (TC=25°C, UNLESS OTHERWISE NOTED)
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
Wavelength |
λC |
844 |
850 |
863 |
nm |
|
RMS spectral width |
λrms |
|
|
0.6 |
nm |
|
Average Launch Power, each lane |
AOPL |
-4.6 |
- |
4.0 |
dBm |
1 |
Outer Optical Modulation Amplitude (OMAouter), each lane |
TOMA |
-2.6 |
|
3.5 |
dBm |
2 |
Transmitter and Dispersion Eye Closure for PAM4 (TDECQ), each lane |
TDECQ |
- |
- |
4.4 |
dB |
|
Average Launch Power of OFF Transmitter, each lane |
TOFF |
- |
- |
-30 |
dBm |
|
Extinction Ratio, each lane |
ER |
2.5 |
3.5 |
- |
dB |
|
RIN14OMA |
RIN |
- |
- |
-132 |
dB/Hz |
|
Optical Return Loss Tolerance |
ORL |
|
- |
12 |
dB |
|
Transmitter Reflectance |
TR |
- |
- |
-26 |
dB |
3 |
RECEIVER CHARACTERISTICS (TC=25°C, UNLESS OTHERWISE NOTED)
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
Wavelength |
λC |
842 |
850 |
863 |
nm |
|
Damage Threshold, average optical power, each lane |
AOPD |
5 |
- |
- |
dBm |
|
Average Receive Power, each lane |
AOPR |
-6.3 |
- |
4.0 |
dBm |
|
Receive Power (OMAouter), each lane |
OMAR |
- |
- |
3.5 |
dBm |
|
Receiver Reflectance |
RR |
- |
- |
-26 |
dB |
|
Receiver Sensitivity (OMAouter), each lane |
SOMA |
- |
- |
-4.4 |
dBm |
1 |
Stressed Receiver Sensitivity (OMAouter), each lane |
SRS |
- |
- |
-1.8 |
dBm |
2 |
Conditions of stressed receiver sensitivity test |
Stressed eye closure for PAM4 |
SECQ |
|
4.4 |
|
dB |
|
OMAouter of each aggressor lane |
OMAouter |
|
3.5 |
|
dBm |
|
Detailed Photos
Product Parameters
Product Features
*Hot-pluggable OSFP 400G SR4 multimode transceiver
*Compliant with OSFP RHS
*Compliant with CMIS Rev 5.0 and above revision
*4-channels of 100G-PAM4 electrical and optical modulation
*Maximum power consumption 8.5W with 4 channels and 6.5W with 2 channels
*Single MPO-12 APC receptacles
*Up to 30m reach on OM3 and 50m reach on OM4
*Operates as a 200Gb/s NDR200 transceiver with 2-fiber splitter ends
*Case operating temperature 0°C to 70°C
Applications
- Data Center Core Links:
- Large-Scale Data Centers: In large-scale data centers, the 400G OSFP optical module is utilized for interconnection between core switches and routers, meeting the demand for high-speed data exchange within the data center.
- National Supercomputing Centers: As national-level high-performance computing platforms, supercomputing centers require extremely high data transmission rates and capacities. The 400G OSFP optical module provides stable 400Gbps transmission rates, fulfilling the computational and data transmission needs of supercomputing centers.
- Carrier Broadband Access:
- In telecom operators' broadband access networks, the 400G OSFP optical module is employed for interconnection between backbone networks and metropolitan area networks, enhancing network bandwidth and transmission efficiency to meet users' demands for high-speed network access.
- Enterprise Networks and Metropolitan Area Networks:
- The 400G OSFP optical module is also suitable for high-speed data transmission scenarios in enterprise networks and metropolitan area networks, such as large-scale corporate intranets and data transmission between cities.
- Cloud Computing and Big Data:
- With the rapid development of cloud computing and big data technologies, data centers have an increasing demand for high-speed network interconnection. The 400G OSFP optical module supports high-speed data transmission and exchange in cloud computing and big data platforms, enhancing overall system performance and efficiency.
- High-Speed Network Research and Applications:
- In the field of high-speed network research, the 400G OSFP optical module is widely used in testbeds, experimental platforms, and other scenarios to explore faster and more efficient network technologies and applications.
Packaging & Shipping
Company Profile
About Suzhou Weimei Electronic Technology Co., Ltd
Mvslink reisted and established in 2012, headquartered in Suzhou, with research and development laboratories in Shanghai, a production factory in Suzhou, and a sales office in South Korea.
Focus on the rapidly growing markets of cloud computing data centers, telecommunications, and 5G wireless, as well as consumer AOC products. Committed to building a semiconductor optoelectronic integration platform and aiming to become a leading brand in the global optoelectronics field.
FAQ
Q: Do you support customization?
A: Definitely yes, customization is available according to your product requirements.
Q: Can l get a sample first?
A: We do offer samples before making any production so that the production is up to the buyer's ex-pectation. Samples can be delivered within 5-8 days.
Q: What is your MOQ?
A: 1 piece is available. We can also provide free samples for our valued customers.
Q: How much will the shipping charges be?
A: It depends on the size of your shipment and the method of shipping. We will offer the charge to you as you requested. If you have another question, please contact us.
Q: Are you real manufacturer?
A: Yes, our factory is located in Suzhou, China, 12 years experience.