Customization: | Available |
---|---|
Usage: | San, Routers, Hubs, Load Balancer, Radio, etc |
Type: | Optical Module |
Still deciding? Get samples of US$ 10.00/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment methods: | |
---|---|
Support payment in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
* Compatibility -- Compatible with Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Aruba, Fortinet, Mikrotik, Netgear, D-Link, Supermicro, TP-Link and Other Open Switches.
* MVSLINK 10GBase-SR SFP+ Module - 10Gb/s rate, MMF, duplex LC connector, 850nm wavelength, up to 300m transmission distance, DDM Support.
* Easy to use -- Easy installation, plug and play, fully hot-pluggable with ESD protection. Widely used in network switch, server, or NIC with SFP+ to a 10 Gigabit fiber channel network with multimode LC for Network Attached Storage(NAS), Storage Area Network(SAN), and High Performance Computing(HPC) applications.
* Low Power Consumption -- Low power consumption(less than 1.05watt) and low EMI emission design. SFP MSA Compliant, IEEE 802.3ae Compliant.
* High Quality -- All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch.
* After-sales Service -- 30 days Free-Returned, 3 years Free Warranty and lifetime technology support, please contact us, any product quality and compatibility issues.
Hot Sale Cisco SFP 10g Sr Compatible 10gbase Sr SFP+ 850nm 300m Dual LC Multimode Dom SFP 10g Sr Optical Transceiver SFP Module
The SFP-10G-SR compatible SFP+ transceiver supports up to 400m link lengths over 4700MHz*km OM4 MMF (300m over 2000MHz*km OM3 MMF) via an LC duplex connector. This transceiver is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae standards and for seamless interoperability in multivendor environments and for seamless interoperability in multivendor environments.
Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Featuring low power consumption and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc.
MVSLINK 10G SFP+ SR transceiver comes with an Industry Leading Lifetime Warranty, surpassing the OEM warranty for the same product. Every SFP+ SR transceiver is environmentally tested in its specific port/platform, which includes compliance verification for distance, wavelength, traffic density and light.
Compatible | Cisco, Juniper, Arista, Brocade, Mellanox, HW, Generic, HPE Aruba, Netgear, TP-Link, Linksys, Broadcom, etc. | ||
Module | MVS-283-S85-C | Vendor Name | Mvslink |
Form Factor | SFP+ | Max Data Rate | 11.1gbps |
Wavelength | 850nm | Max Cable Distance | 300m@OM3/400m@OM4 |
Connector | Duplex LC | Media | MMF |
Transmitter Type | VCSEL | Receiver Type | PIN |
TX Power | -7.3~-1dBm | Receiver Sensitivity | <-11.1dBm |
Power Budget | 3.8dB | Receiver Overload | -1dBm |
Power Consumption | ≤1W | Extinction Ratio | >3dB |
DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
Protocols | IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI | Warranty | 3 Years |
Core Size | 50/125 µm | Packaging Technology | BOX Packaging |
ABSOLUTE MAXIMUM RATINGS (TC=25°C, UNLESS OTHERWISE NOTED)
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings will cause permanent damage and/or adversely affect device reliability.
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Storage Temperature | TS | -40 | - | +85 | ºC | |
Operating Relative Humidity | RH | 0 | - | +85 | % | No condensation |
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Operating Case Temperature | Tc | 0 | - | 70 | ºC | |
Power Supply Voltage | Vcc | 3.15 | 3.3 | 3.45 | V | |
Lane Baud Rate | BRLANE | 10.3125 | Gbps |
TRANSMITTER CHARACTERISTICS (Ta, UNLESS OTHERWISE NOTED)
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Center wavelength | λ | 840 | 860 | nm | ||
RMS spectral width | Pm | 0.6 | nm | |||
Average optical power | Pavg | -8.2 | -1 | dBm | ||
Optical modulation amplitude | OMA | -6.4 | 3 | dBm | ||
Average launch power of OFF transmitter | Poff | -30 | dBm | |||
Extinction ratio | ER | 4 | dB | |||
Optical return loss tolerance | 12 | dB |
RECEIVER CHARACTERISTICS (Ta, UNLESS OTHERWISE NOTED)
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Center wavelength | λ | 840 | 850 | 860 | nm | |
Damage threshold | 3.4 | dBm | ||||
Receive power overload | -1 | dBm | ||||
Receiver reflectance | -12 | dB | ||||
Receiver sensitivity | SENS | -9.9 | dBm | Note1 | ||
LOS Assert | LOSA | -25 | dBm | |||
LOS De-Assert | LOSD | -11.5 | dBm | |||
LOS Hysteresis | LOSH | 0.5 | dB |
Note 1: Measured with a 10.3125G, PRBS-31 NRZ, ER>3dB, BER<10E-12.
Product Features
Applications
Q: what kind of laser is used in the 10G SFP+ SR module?
A: The 10G SFP+ SR module belongs to the 850nm band and uses VCSEL laser.
Q: Please confirm if this SFP+ module is compatible with the Cisco C9200L-24T-4X-E switch as 10Gbit uplink port.
A: Yes, this SFP+ module is compatible with Cisco C9200L-24T-4X-E switch as 10Gbit uplink port.
Q: What cable type is needed for 10G SR transceivers?
A: The MVSLINK 10GBASE-SR SFP+ transceivers can use duplex LC/UPC multimode fiber patch cables for direct interconnection and as for 10G to 40G network speed upgrade connection, 8 fibers multimode MTP/MPO-LC harness cables can be applied.
Q: Can l get a sample first?
A: We do offer samples before making any production so that the production is up to the buyer's expectation. Samples can be delivered within 5-8 days.
Q: What is your MOQ?
A: 1 piece is available. We can also provide free samples for our valued customers.
Q: How much will the shipping charges be?
A: It depends on the size of your shipment and the method of shipping. We will offer the charge to you as you requested. If you have another question, please contact us.
Q: How to place an order?
A: Please contact our sales representative or send us an inquiry, and we will contact you within 12 hours.
****Contact Sales for a fast conversation