| Customization: | Available |
|---|---|
| Usage: | Data Center, 10g Ethernet, Fiber Channel etc. |
| Type: | Optical Module |
|
Still deciding? Get samples of US$ 28.00/Pair
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
* Compatibility -- Cisco SFP-10G-BXD-I/SFP-10G-BXU-I,Ubiquiti, Netgear, D-Link EMC, F5, Meraki, QTC, Supermicro, and Other Open Switches.
* MVSLINK 10GBASE-BIDI Bidirectional SFP+ to single LC Optical transceiver module, Single Mode, Wave length: Up: TX1270nm/RX1330nm; Down: TX1330nm/RX1270nm, DDM, up to 20km over single LC.
* Easy to use -- 10G-LR transceiver with Advanced DDM Function to monitor real-time parameter and state on fiber links; It supports hot-pluggable, plug and play; IEEE 802.3ae, SFP+ MSA Compliant, CPRI, eCPRI.
* Superior DDM Function -- DDM allows you to monitor the critical information concerning the status of the transmitted and received signals of the transceivers in real-time to find out some potential problems.
* High Quality -- All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch.
* After-sales Service -- 30 days Free-Returned, 3 years Free Warranty and lifetime technology support, please contact us, any product quality and compatibility issues.
Cisco Compatible Factory Direct Price SFP+ 10gbase Bidi 1270nm-Tx/1330nm-Rx 10km Dom Simplex LC/Upc SMF SFP 10g Lr
Optical Transceiver Module SFP Module
MVSLINK Cisco compatible SFP+ transceiver supports up to 10km link lengths over OS2 SMF via an LC simplex connector. This 10G BiDi SFP+ transceiver, featured with data transmission over a single strand of fiber, the one transceiver transmits a 1270-nm channel and receives a 1330-nm signal, whereas the other BiDi SFP+ optics transmits at a 1330-nm wavelength and receives a 1270-nm signal.
Each BIDI SFP+ transceiver module is individually tested to be used on a series of switches, routers, servers, network interface cards (NICs) etc. Featuring low power consumption and high speed, this 10G BIDI SFP+ transceiver is ideal for enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc.
MVSLINK 10G SFP+ BIDI transceiver comes with an Industry Leading Lifetime Warranty, surpassing the OEM warranty for the same product. Every SFP+ BIDI transceiver is environmentally tested in its specific port/platform, which includes compliance verification for distance, wavelength, traffic density and light.
| Compatible | Cisco, Juniper, Arista, Brocade, Mellanox, HW, Generic, HPE Aruba, Netgear, TP-Link, Linksys, Broadcom, etc. | ||
| Module | Mvs-289-Bxxyy-C | Vendor Name | Mvslink |
| Form Factor | SFP+ | Max Data Rate | 11.3168Gbps |
| Wavelength | 1270nm-TX/1330nm-RX | Max Cable Distance | 20KM |
| Connector | Simplex LC | Media | SMF |
| Transmitter Type | DFB | Receiver Type | PIN |
| TX Power | -8.2~0.5dBm | Receiver Sensitivity | <-14.4dBm |
| Power Budget | 9dB | Receiver Overload | 0.5dBm |
| Power Consumption | ≤1W | Extinction Ratio | >3.5dB |
| DDM/DOM | Supported | Commercial Temperature Range | -40 to 85°C (-40 to 185°F) |
| Protocols | IEEE 802.3ae, SFP+ MSA Compliant, CPRI, eCPRI | Warranty | 3 Years |
ELECTRICAL CHARACTERISTICS
| Parameter | Symbol | Conditions | Min. | Typ. | Max. | Unit |
| Transmitter | ||||||
| Input Differential Impedance | RIN | - | 100 | - | Ω | |
| Single-ended Data Input Swing | VIN | 90 | - | 450 | mVp-p | |
| Transmit Disable Voltage | VDIS | 2 | - | VCCHOST | V | |
| Transmit Enable Voltage | VEN | VEE | - | VEE+0.8 | V | |
| Transmit Fault Assert Voltage | VFA | 2 | - | VCCHOST | V | |
| Transmit Fault De-Assert Voltage | VFDA | VEE | - | VEE+0.4 | V | |
| Receiver | ||||||
| Single-ended Data Output Swing | VOD | 200 | - | 450 | mVp-p | |
| LOS Fault | VLOSFT | 2 | - | VCCHOST | V | |
| LOS Normal | VLOSNR | VEE | - | VEE+0.4 | V | |
GENERAL SPECIFICATIONS (TC=25°C, UNLESS OTHERWISE NOTED)
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Operating Case Temperature | Tc | -40 | - | 85 | ºC | |
| Power Supply Voltage | Vcc | 3.15 | 3.3 | 3.45 | V | |
| Maximum Power Dissipation | PD | - | - | 1.5 | W | |
| Lane Baud Rate | BRLANE | - | 10.3125 | - | Gbps | |
| Max Supported Link Length | L | - | - | 10 | Km |
Custom Coding & Manufacturing for Your Optical Modules.Expert optical module makers offering OEM branding & customized coding. Stand out with our reliable, personalized solutions!
Product Features
Applications
Q: What is the main difference between the BIDI module and the conventional optical module?
A: The primary difference from traditional duplex optical modules is that the BiDi optical module operates as a simplex module allowing the customer to double the utilization of the existing fiber. Besides, bidirectional transceiver doubles the amount of network equipment that can be attached to the same set of 4 fibers, compared to regular transceivers.
Q: Whether this transceiver is having both Transmitter and Receiver at one single point?
A: Yes, this module is a single fiber bidirectional module that utilizes wavelength division multiplexing (WDM) technology for bidirectional transmission.
Q: Since it is simplex, is it transmit at the wavelength of 1270nm from End A to End B, and receive at the wavelength of 1330nm from End B to End A at two different time?
A: Filtering is accomplished through the filters in the optical module, while simultaneously transmitting the TX optical signal and receiving the RX optical signal, or vice versa.
Q: Can l get a sample first?
A: We do offer samples before making any production so that the production is up to the buyer's expectation. Samples can be delivered within 5-8 days.
Q: What is your MOQ?
A: 1 piece is available. We can also provide free samples for our valued customers.
Q: How much will the shipping charges be?
A: It depends on the size of your shipment and the method of shipping. We will offer the charge to you as you requested. If you have another question, please contact us.
Q: How to place an order?
A: Please contact our sales representative or send us an inquiry, and we will contact you within 12 hours.
****Contact Sales for a fast conversation
){kind=link}